Configuring Sonicos For 200 Series Sonicwave Access Points; Configuring The Sonicwave Provisioning Profile - SonicWALL SonicWave 200 Series Deployment Manual

Configuring SonicOS for 200 Series
SonicWave Access Points
This section provides instructions for configuring SonicOS on your SonicWall network security appliance to
connect your 200 series SonicWave to the WLAN zone and manage it as a Layer 2 device. This includes:
•

Configuring the SonicWave Provisioning Profile

• Configuring the Network Interface
• Configuring the WLAN Zone
NOTE: For addition information, see the online help with your firewall.
Configuring the SonicWave Provisioning Profile
SonicWave provisioning profiles include all of the settings that can be configured on a 200 series SonicWave
access point. The profile is then selected when you configure the wireless zone (WLAN by default). When your
200 Series SonicWall access point connects to that zone, it is automatically provisioned with the profile settings.
To configure the SonicWave provisioning profile:
1 Log into your SonicWall firewall as an administrator (default: admin / password).
2 In the MANAGE view, navigate to the Connectivity | Access Points > Base Settings page.
3 In the SonicWave Provisioning Profiles section, do one of the following:
• To modify the default SonicWave profile, click the Configure icon in the SonicWave row.
• To create a new profile, select SonicWave Profile from the Add New Profile drop-down list.
The Add/Edit SonicWave Profile dialog is displayed.
for radio frequency, mode, authentication type
to which the 200 series SonicWave will connect
for trust, security, and SonicWave provisioning profile
p
SonicWall SonicWave Deployment Guide
Configuring SonicOS for Wireless Access
69