Sonicwave 231O Hardware Overview; Sonicwave 231O Product Description - SonicWALL SonicWave 200 Series Deployment Manual

SonicWave 231o Hardware Overview

SonicWave 231o Product Description

Because this product has unique market and functionality, the SonicWave 231o requires specially trained
professionals to configure and install it. Also, according to FCC rules (similar rules in other regulatory domains),
you are required to consult with an experienced professional RF installer/dealer/technician to conduct the
installation, conform to the regulation, and correct the interference from the standard industry measures. The
FCC requires you to be notified that any changes or modifications made to the device, that are not expressly
approved by SonicWall, could void your authority to operate the equipment. A professional installer is
responsible for the proper installation and configuration of the outdoor SonicWave. The installer needs to
understand and prepare for operating near any Terminal Doppler Weather Radar (TDWR) locations based on the
FCC Memorandum and comply with all its requirements. The professional installer needs to choose the correct
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication to ensure the reduction of potential radio interference
with other users. The professional installer must also properly select the current country of operation from the
SonicWall configuration interface. Incorrectly entering the country of operation could result in illegal operation
and might cause harmful interference to other systems.
Distinguishing features of the SonicWave 231o include:
• For outdoor application, licensed installer required.
• 2 x 2 MU-MIMO
• NEMA mounting kit / 4 external, omni-directional antennas.
• Ethernet: 1 x 10/100/1000 auto-sensing RJ-45
• PoE in: 802.11af
SonicWave 231o Top
SonicWave 231o Hardware Components
Component
2.4GHz and 5GHz radios
1GbE LAN port
Flash memory
DDR Memory
Description
Dual radios provide:
• 802.11b/g/n/ac
• DFS (Dynamic Frequency Selection)
SonicWave 231o complies with FCC rules to detect and avoid interfering with radar
signals in DFS bands.
• 2x2 11n + 2x2 11ac wave 2 MU-MIMO
1 Ethernet 10/100/1000 LAN port for wired connection to a SonicWall network security
appliance
256 MB NAND Flash
512 MB DDR3-1600MHz
SonicWall SonicWave Deployment Guide
Hardware Overview
15