Sonicwave 224W; Deployment Requirements - SonicWALL SonicWave 200 Series Deployment Manual

SonicWave 224w

Deployment Requirements

SonicOS Firmware
SonicWave 224w access points are centrally managed by SonicWall network security appliances
running SonicOS 6.5.3.1 or higher.
Power Source
Use a 802.3at compliant PoE injector or a PoE-enabled switch to provide power to each SonicWave 224w.
A 12 VDC power adapter may also be used.
Internet Connectivity
An active Internet connection is required for your SonicWall network security appliance to download the
latest SonicWave 224w firmware.
Gigabit Ethernet Connectivity
The SonicWave 224w requires a 1 Gigabit connection to the SonicWall network security appliance to take
full advantage of the SonicWave 224w data throughput capability.
SonicWall SonicWave Deployment Guide
Deployment Requirements per Model
31