5.4. Configure Sequential Hunt Group
In the left panel right-click HuntGroup and select New (not shown). For the Name field, enter a
descriptive name for the hunt group. Set the Extension field to an unused extension, in this case,
402, and set Ring Mode to Sequential. For the No Answer Time (secs) field, set the number of
seconds an extension rings before the call is passed to the next extension in the list, in this case,
10. Click Edit to configure the list of extensions.
RP; Reviewed:
SPOC 6/25/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
9 of 19
2NHeliosIP-IPO8