Avaya Configuring IP Office R8.0 Application Notes page 11

6. Configure 2N Helios IP
The following steps detail the configuration for Helios IP using the Web Interface. The steps
include the following areas:

Launch Web Interface

Administer SIP Settings

Administer Codecs

Configure Quick Dialling Buttons

Configure Miscellaneous Settings
The factory default setting for DHCP is on. Prior to configuration, follow the procedures in
Section 9 Reference [2] to obtain the IP address of Helios IP.
6.1. Launch Web Interface
Access the Helios IP web interface, enter http://<ipaddress> in an Internet browser window,
where <ipaddress> is the IP address of Helios IP. Log in with the appropriate credentials. The
Helios IP Information screen is shown.
RP; Reviewed:
SPOC 6/25/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
11 of 19
2NHeliosIP-IPO8