Electric Parts - Canon iPF800 Series Service Manual

Chapter 1

1.7.1.3 Electric Parts

iPF810 / iPF820
The electrical unit of the printer is activated when connected to the AC power supply.
At the rear of the printer are the main controller, power supply, interface connector, and optional media take-up unit connector. The head relay PCB and carriage
relay PCB are incorporated in the carriage unit, and the operation panel is located on the upper right cover.
When servicing the printer with the cover removed, be extremely careful to avoid electric shock and shorting contacts.
[1] Operation panel
[2] Carriage relay PCB
[3] Head relay PCB
[4] AC inlet
[5] Lower roll unit connector(iPF820)
[6] Lower roll unit relay PCB(iPF820)
[7] lower roll unit PCB(iPF820)
1-80
[1]
Online Data Information Power
Message
Cleaning
(3sec.)
Stop
Menu Load/Eject (1sec.)
[13]
[12]
[10]
[11]
[2]
[3]
[9] [8]
F-1-45
T-1-53
[8] Power supply PCB
[9] Main controller PCB
[10] Ethernet connector
[11] USB port
[12] Media take-up relay PCB(iPF810)
[13] Media take-up unit connector(iPF810)
[4]
[5]
[6]
[7]
0020-5474