Allows paper to be ejected by suppressing its loosing.
[2] Registration line
Load paper to fit to this line.
[3] Carriage
Drives the printhead.
[4] Carriage shaft
The part through which the carriage travels.
[5] Paper retainer
A principal part for feeding paper, the paper retainer holds paper in position.
[6] Platen
The part on which the printhead travels to perform printing. Suction holes on its surface keep the paper from loosening during travel.
[7] Borderless printing ink reservoir
Receives inks overflowing the outside of the paper during borderless printing.
[8] Cleaner brush
Sweeps off paper dust from the platen surface when cleaning the inside of the upper cover.
[9] Cutter rail
The part the cutter unit traverses to cut paper.
[10] Cutter unit
A round cutter for cutting paper automatically.
[11] Linear scale
A principal part for detecting the location of the carriage. Be careful never to touch the linear scale when cleaning the inside of the upper cover or removing paper
dust.
[12] Switch
Set this switch to the circle position to perform borderless printing.