Warning Table; Warnings - Canon iPF800 Series Service Manual

Chapter 8

8.2 Warning Table

8.2.1 Warnings

iPF810 / iPF820
* Codes represent the numbers that are displayed in DISPLAY in service mode and that are recorded in PRINTINF. Messages that are not accompanied by a code
indication are not logged.
Display massage
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Problem with Printhead.
Chk printing results
Prepare for maint cart
replacement.
Prepare for parts
replacement.
Call for service.
Parts replacement time has
passed.
Call for service.
GARO W1221
GARO W1222
GARO W1223
GARO W1225
GARO W1226
GARO W1231
GARO W1232
GARO W1233
GARO W1234
GARO W1235
End of paper feed.
Cannot feed paper more.
This type of paper is not
compatible with HP-GL/2.
GL2:W0501
The memory is full.
GL2:W0904
The memory is full.
GL2:W0903
The memory is full.
GL2:W0502
The parameter is out of
range.
GL2:W0504
This command is not
supported.
Mail box nearly full.
Delete unwanted data
Mail box full.
Now printing without
saving data.
Before borderless printing,
move the blue platen switch.
Blue platen switch is dirty.
Please clean the switch.
Not much ink is left. Prepare
to replace the ink.
Not much ink is left. Prepare
to replace the ink.
Not much ink is left. Prepare
to replace the ink.
Not much ink is left. Prepare
to replace the ink.
Not much ink is left. Prepare
to replace the ink.
8-2
Code*
0180104-1000 BK ink tank near-empty
0180101-1001 Y ink tank near-empty
0180102-1002 M ink tank near-empty
0180103-1003 C ink tank near-empty
0180106-1006 MBK ink tank near-empty
0180106-1007 MBK2 ink tank near-empty
01800500-1010 Number of non-discharging nozzles in printhead:
Warning level
01841001-281A Maintenance cartridge near-full
Parts counter W1 level
Parts counter W2 level
01341221-1030 GARO (image mode): Unknown command
01341222-1031 GARO (image mode): Invalid parameter count (no
parameters)
01341223-1032 GARO (image mode): Required parameter missing
01341225-1034 GARO (image mode): Other warning
01341226-103A GARO (image mode): Image processing table error
01341231-1035 GARO (setup): Unknown command
01341232-1036 GARO (setup): Invalid parameter count
01341233-1037 GARO (setup): Required parameter missing
01341234-1038 GARO (setup): Data out of bounds
01341235-1039 GARO (setup): Other warning
Forced feed limit
01860006-1015 Non-support paper of HP-GL/2
01340501-1040 Memory full (HP-GL/2)
01340904-1048 Overflow of Polygon buffer (HP-GL/2)
01340903-1047 Overflow of replot buffer (HP-GL/2)
01340502-1041 Invalid parameter (HP-GL/2)
01340504-1043 Invalid command (HP-GL/2)
011A1001-2901 The free hard disk space left for Personal Boxes in the
printer's hard disk does not have more than 1 GB,
combined.
01861003-2902 100 jobs are stored in the Personal Box.
01861004-1049 The platen shutter is closed at the borderless printing. Open the corresponding platen shutter.
01861004-1050 Platen shutter cleaning warning
01810103-1003 C ink tank near-empty
01810102-1002 M ink tank near-empty
01810101-1001 Y ink tank near-empty
01810106-1006 MBK ink tank near-empty
01810104-1000 BK ink tank near-empty
T-8-2
Condition detected Action
Renew the ink tanks.
Clean the printheads. Renew the printheads.
Identify the head management sensor unit.
Replace the maintenance cartridge.
Check the parts counter in service mode.
After checking the parts counter in service mode,
replace any part whose counter is nearing the error
value.
Verify the transmitted data before reprinting.
Check the remaining quantity of roll media.
Exchange for the compatible paper to HP-GL/2.
Check if there is the non-image area of the print.
Verify the transmitted data before reprinting.
Verify the transmitted data before reprinting.
Delete unneeded jobs stored in Personal Boxes.
Delete unneeded jobs stored in Personal Boxs.
Clean the platen shutter.
Renew the C ink tank.
Renew the M ink tank.
Renew the Y ink tank.
Renew the MBK ink tank.
Renew the BK ink tank.
0020-5741