Philips RQ1087/21 User Manual page 15

 Carefully shake off excess water and leave the shaving heads open
to let the shaving unit dry completely.
Never dry the shaving unit with a towel or tissue, as this may damage
the shaving heads.
Cleaning the shaving unit with the brush supplied
1 Switch off the shaver.
2 Pull open the three shaving heads one by one (Fig. 0).
 Clean the shaving heads and the hair chambers with the brush
supplied (Fig. 2).
 Close the shaving heads.
Cleaning the trimmer with the brush supplied
Clean the trimmer every time you have used it.
1 Switch off the shaver.
2 Press the trimmer slide forwards to slide out the trimmer (Fig. 28).
 Clean the trimmer with the short-bristled side of the brush
supplied. Brush up and down along the trimmer teeth. (Fig. )
 Switch the shaver on and off and repeat step .
5 Press the trimmer slide backwards to retract the trimmer.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a
drop of sewing machine oil every six months.
storage
There are two ways to store the shaver or to take it with you when you
travel:
- put the shaver in the Power Pod or in the Jet Clean system. Make
sure the protection cap is not on the shaving unit.
- slide the protection cap onto the shaving unit to prevent damage to
the shaving heads (Fig. 44).
English
17