Philips RQ1087/21 User Manual page 14

English
16
- When the fluid level drops below the minimum level, the cleaning
light and the 'cleaning chamber empty' symbol start to flash and the
holder returns to its starting position (Fig. 37).
- If you use the washing machine to clean your shaver every day, you
need to refill the cleaning chamber approx. every 15 days.
Cleaning the Jet Clean system
1 Simultaneously press the release buttons on both sides of the Jet
Clean System (1). Then lift the Jet Clean System off the cleaning
chamber (2). (Fig. 0)
The cleaning chamber remains behind.
,
2 Pour any remaining cleaning fluid out of the cleaning
chamber. (Fig. 8)
You can simply pour the cleaning fluid down the sink.
 Rinse the cleaning chamber under the tap (Fig. 9).
The cleaning chamber is not dishwasher-proof.
 Fill the cleaning chamber with HQ200 cleaning fluid up to the MAX
indication (Fig. 1).
5 Place the Jet Clean System back onto the cleaning
chamber. (Fig. 2)
Make sure the release buttons click back into place.
- You can clean the Jet Clean System with a moist cloth.
- Clean the cleaning chamber every 15 days.
Cleaning the shaving unit under the tap
1 Switch off the shaver.
2 Pull open the three shaving heads one by one (Fig. 0).
 Rinse all three shaving heads and all three hair chambers under a
hot tap for 0 seconds. (Fig. 1)
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.