Quick Charge - Philips RQ1087/21 User Manual

English
12
A fully charged shaver has a shaving time of up to 65 minutes, which is
enough for approx. 21 shaves.
The actual shaving time is calculated by the shaver. If you have a heavy
beard, the shaving time may be less than 65 minutes. The shaving time
may also vary over time, depending on your shaving behaviour and beard
type.

Quick charge

After the shaver has charged for 5 minutes, it contains enough energy for
one shave.
Charging in the Power Pod
1 Put the small plug in the Power Pod (Fig. 21).
2 Put the adapter in the wall socket.
 Pull at the top of the lid (1) and remove it (2) (Fig. 22).
 First insert the top of the shaver into the Power Pod (1) and then
press the bottom part into the Power Pod (2) (Fig. 2).
Note: The shaver cannot be placed in the Power Pod when the protection cap
is on the shaving unit.
The display shows that the shaver is charging (see chapter 'The
,
display').
Charging in the Jet Clean system
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
 Place the shaver upside down in the holder with the display
pointing towards the front of the Jet Clean System (Fig. 2).
Note: RQ1090,RQ1062,RQ1060 only: when you turn the shaver upside
down, the indications on the display are also turned upside down so you can
still see the remaining battery capacity.
 Press the shaver tightly into the holder to lock it into place (Fig. 25).