Avaya DA60 Application Notes page 11

Click the icon on the toolbar to launch the Audio Tuning Wizard. Note that the icon is
not available during an active telephone call. In addition, make sure to close all other PC
applications before running the wizard.
On the first screen of the wizard, select PLTDA60 for primary playback and recording device..
Click Next.
Complete the remaining pages of the wizard (not shown):
On the second page of the wizard, specify that a Headset/Handset is used to make calls,
instead of the PC speakers and a microphone.
On the third page, click the Test button to check whether the headsets are receiving
audio. If the headsets are operating correctly, a test sound is heard. The volume on the
headset speakers can be set using the slider while the test sound is being played.
On the next page click the option to "Automatically adjust the microphone recording
level", and use the slider to set the desired sensitivity, so when speaking normally into the
microphone the audio meter stays between the carets. The further the slider is to the right,
the more sensitive the microphone will be. The level on the microphone could also be
adjusted manually, clicking "Use the following microphone recording level" option and
using the slider to set the desired level.
The next page is used to determine the normal background noise at the current location.
This step helps in preventing Avaya one-X® Attendant from transmitting the background
noise at the location when the user is not speaking during a call. Click the Test button
and do not speak while the test is running.
Click Finish on the last page of the wizard
MAA; Reviewed:
SPOC 11/20/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
11 of 15
DA60_OneX_Attd