Rinnai BC-100V1Z Operation And Installation Manual page 14

Infinity kitchen and bathroom deluxe controllers
Table of Contents

Advertisement

Mounting the Kitchen Deluxe controller (MC-100V1Z)
1. Determine the position of the controller.
2. Using the wall mounting bracket as a template, mark and drill three holes (mounting and cable
access), refer dimensions on next page.
3. Fix the mounting bracket to the wall using the appropriate fixings.
4. Run the cable through the hole in the wall.
5. Carefully remove the face plate from the controller using a screwdriver.
6. Connect the cable to the controller. At this point cables from other controllers may also be
connected to the screw terminals of the kitchen controller, eliminating the need for multiple
cable runs directly to the water heater.
Controllers are not polarity sensitive. Feed excess cable lengths into the wall cavity to avoid
pinching the cables.
7. Fasten the controller to the wall mounting bracket. Avoid over-tightening the fixings as this may
cause damage. Once secure replace the face plate.
5
Mounting the Bathroom Deluxe controller (BC-100V1Z)
1. Determine the position of the controller.
2. Using the wall mounting bracket as a template, mark and drill three holes (mounting and cable
access), refer dimensions on next page.
3. Run the cable through the access hole ensuring the connector end of the cable to located
nearest to the controller.
4. Put the double sided self-adhesive seal to the back of the controller.
5. Remove the face plate from the controller, do this by placing your thumbs on the front of the
display, and while hooking your fingers behind the top of the plate gently push—DO NOT use a
screwdriver as this may damage the controller.
6. Connect the cable to the water heater. Feed any excess cable length into the wall cavity to
avoid pinching the cables.
7. Fix the controller to the wall using the appropriate fixings. Avoid over-tightening the fixings as
this may cause damage. Once secure replace the face plate.
Controller
cable
Connector
3
14 | Rinnai INFINITY Deluxe controller OIM 01-20
6
Backing seal
Remove film to expose
self-adhesive
4
6
5
7
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc-100v1z

Table of Contents