IBM BladeCenter HS21 Series Problem Determination And Service Manual page 52

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 1885 and 8853," on page 73 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
00151300 MCA: Excessive Recoverable Error
Detected Proc=xx
00151350 Processor Machine Check Data a Bank= xx
APIC ID=xx CR4=xxxx xxxx
00151351 Processor Machine Check Data b Address=
xxxx xxxx xxxx xxxx Time stamp=xxxx xxxx
xxxx xxxx
00151352 Processor Machine Check Data b Status=
xxxx xxxx xxxx xxxx
00151500 Excessive Single Bit Errors Detected
DIMM=xx
00151700 Started Hot Spare memory Copy. Failed
row/rows=xx and yy copied to spare
row/rows=aa and bb
00151710 Completed Hot Spare memory Copy. Failed
row/rows=xx and yy copied to spare
row/rows=aa and bb
36
BladeCenter HS21 Types 1885 and 8853: Problem Determination and Service Guide
Action
1. (Trained service technician only) Reseat
microprocessor xx.
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. (Trained service technician only)
Microprocessor xx
b. (Trained service technician only) System
board assembly
Additional data for debug. Check error codes
00151100, 00151200, and 00151300 for action.
Additional data for debug. Check error codes
00151100, 00151200, and 00151300 for action.
Additional data for debug. Check error codes
00151100, 00151200, and 00151300 for action. If bit
10 of Data b status is set, do not replace CPU.
1. Reseat DIMM xxand the Memory and I/O
Expansion Blade if one is installed.
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. DIMM xx.
b. Memory and I/O Expansion Blade (if one is
installed)
c. (Trained service technician only) System
board assembly
1. Reseat DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.
2. Replace DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.
1. Reseat DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.
2. Replace DIMM. See error code 00151500 to
determine which DIMM to reseat or replace.