Page 28
4 Parameter Lists. The link ensures synchronizing of the not Factory Cannot be changed. It contains the Danfoss changeable during operation parameter values setup data set, and can be used as a data source...
Page 44
The different set-ups of stator winding non-salient SPM. resistance and induction are shown in Illustration 3.6. Danfoss frequency converters always require the line-to- Enter the value of the d-axis common value. The back EMF of a PM motor is defined inductance.
Page 52
NOTICE Thermistor Activates a warning when the connected warning thermistor in the motor reacts in the event of Danfoss recommends using 24 V DC as thermistor supply motor overtemperature. voltage. Thermistor Stops (trips) the frequency converter when trip the connected thermistor in the motor reacts NOTICE in the event of motor overtemperature.
Page 234
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies.