000.book 103 page Friday, July 28, 2017 2:30 PM
Lighting control display
The brightness of the currently set
meter is displayed.
You can adjust the meter's brightness
adjustment to 4 levels.
Turn on headlights and car width
lights, light
Turn on the display switching knob (2)
or the info switch (3) while setting the
control display (see page 3-96). The
brightness changes one step at a time.
Warning
Please do not adjust the brightness while driving.
You may be distracted by the operation and lead
to unexpected accidents.
Advice
During adjustment, the display switching
knob or
If you press the flash switch for a short time or
do not press it for more than 5 seconds, the
odometer display will be displayed.
Removing the lead battery erases the
memory and returns to the initial state, so you
need to adjust the brightness again.
Eco driving display function
When the engine switch is set to LOCK
(OFF),
displayed in the multi information
display for a certain period of time.
■ Idling stop Saving fuel
Type-specific equipment
The figure values are examples of display
bright
Fuel saved by idling stop in one run is
displayed in ml unit.
(initial state)
■ Idling stop time
Type-specific equipment
dark
The figure values are examples of display
63R30680
The total time of idling stop is displayed
in hours, minutes, and seconds in one
operation.
Before driving / meter
the
following
contents
Accumulated idling stop
Saving fuel
Accumulated idling stop time
are
3
63R30840
63R30850
3-103