Operating Range Of Request Switch (Outside The Vehicle) - Suzuki Wagon R Instruction Manual

000.book 10 pages Friday, July 28, 2017 2:30 PM
Before driving / opening and closing the door
To prevent accidents such as fire and
theft, when leaving the car, please stop
the engine and lock the door.
Advice
 In the following cases, request
The switch does not work.
・One of the doors is open
・Engine switch
When
ON
3

When locking / unlocking the door
with the request switch, the answer
back function and the timer lock
function operate.
→ page 3-6
(Answer back function)
→ page 3-7
(Timer lock function)
 When leaving the car for a while,
Please do not
valuables in the car. There is a
possibility of theft.
Operating range of request
switch (outside the vehicle)
It is hemispherical from the vicinity of
the request switch on the front door or
back door and it is within about 80 cm
around.
3-10
Warning
Or
ACC
leave cash or
About 80 cm
About 80 cm
Advice
 "Operating range of request switch"
Even if you possess a mobile remote
control, the remote
detected and the request switch may not
operate if it is in the following situation.
· The battery of the mobile remote
control is exhausted
· Mobile remote control is affected
by strong radio waves and noise
· The mobile remote controller is in
contact with metal objects or
covered
· The remote control is too close to
the door
· The remote control is near the
ground, at a high position, in the
pocket of the buttocks, etc., and it is
away from the request switch
 The operation of the request switch
The remote control is only the door in the
working range. For example, if there is a
remote control in the operating range of
driver 's seat door, the request switch on
the driver' s seat door operates but the
request switch on the front passenger 's
door and back door will not operate.
 If there is a spare mobile remote control
inside the car, the remote control is
detected,There is a risk that the engine
switch will not operate properly.
Operating range
About 80 cm
Operating range
82K266
control is not