Operation Of Head Up Display; Information Display - Suzuki Wagon R Instruction Manual

000.book Page 71 Friday, July 28, 2017 2:30 PM

Operation of head up display

Please operate it while the head up
display is stopped. Brightness and
display position can not be adjusted
while driving.
■ Head-up display operation
Work switch
(3) (2)
HUD
(3) (1)
(1) HUD switch
(2) Brightness adjustment switch
(3) Vertical switch
■ ON / OFF of head up display
When the engine is engaged, you can
switch display expansion / storage by
holding down the HUD switch (1) for a
long time.
Advice
If the engine is stopped with the HUD
switch being operated with the head up
display stored, it will not be automatically
deployed at the next start of the engine.
Before driving / meter
■ ON / OFF of intersection
information display (※)
By short-pressing the HUD switch (1),
you can
information display (4) ON / OFF.
※ Only for use with navigation that corresponds to
omni directional monitors (equipped with type)
equipped vehicles and omni directional monitors
The figure values are examples of display
63R30980
Switch ON / OFF of intersection
information display when navigation
guidance function is displayed.
 There may be a difference between
ON / OFF of the intersection information
display and the information display
indicated by the navigation.
 Navigation For details on the
functions and operation of the main unit,
refer to the navigation
Please read the manual of the manual.
toggle the intersection
(4)
63R30990
Advice
3
3-71