Rope Towing; The Position To Put The Rope On - Suzuki Wagon R Instruction Manual

000.book 35 pages Friday, July 28, 2017 2:30 PM

Rope towing

The position to put the rope on

I will put the rope on a tow hook.
Remove the tool (jack bar, wheel
1
nut wrench, towing hook).
→ page 7-2 (tool, jack,
Tire Punk Emergency Repair Set
Storage Location)
Insert the jack bar (3) covering the
2
cloth (2) at the notch of the towing
hook cover (1) and pry the cover
to remove it.
(2)
(3)
The figure above is a typical

example. It depends on the type of
car.
Pull the towing hook cover down so
3
that the towing hook can be
inserted.
The cover has a drop prevention

strap attached. Please pull the
cover all the way to the stop
position.
In case of emergency / others
(1)
63R70250
Note
If you do not pull the tow hook cover all
the way down, the cover hits the bumper
and it may cause scratches. Also, if you
pulling or twisting the cover vigorously,
there is a risk that the string of the fall
prevention string will be damaged.
Insert the towing hook (5) into the
4
towing hook insertion port (4) and
tighten it to the extent that it will
not fit by hand.
Tighten the towing hook firmly
5
with the wheel nut wrench (6).
(6)
(4)
(5)
63R70260
7
63R70270
7-35