Table of Contents
Advertisement
The meters and display illuminate when
■
The engine switch is in IGNITION ON mode.
Instrument cluster brightness adjustment
■
The instrument cluster brightness levels when the tail lights are on and off can be
adjusted.
The brightness of the instrument cluster lights
■
When the tail lights are on, the brightness will change. However, when the surroundings
are bright (daytime, etc.) turning on the tail lights will not change the instrument cluster
brightness.
In addition, the brightness of the instrument cluster lights is automatically adjusted based
on the light sensor detecting how bright the surroundings are.
Customization
■
The meter display can be customized on the multi-information display. (P. 600)
WARNING
The information display at low temperatures
■
Allow the interior of the vehicle to warm up before using the liquid crystal information
display. At extremely low temperatures, the information display monitor may respond
slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, causing
rapid and excessive engine braking and possibly an accident resulting in death or
injury.
NOTICE
To prevent damage to the engine and its components
■
Do not let the indicator needle of the tachometer enter the red zone, which indicates
●
the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is in the red
●
zone (H). In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (P. 584)
GX460_OM_OM60R28E_(GE)
2. Instrument cluster
85
2
Advertisement
Table of Contents
