Table of Contents
Advertisement
Installing child restraints using a seat belt
Rear-facing Baby seat (infant seat)/child seat (convertible seat)
■
Fold the seatback forward. Then
1
return the seatback and secure it
at the first lock position (most
upright position). (P. 131)
Place the child restraint system
2
on the second seat facing the rear
of the vehicle.
Run the seat belt through the
3
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Install a locking clip near the tab
4
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
GX460_OM_OM60R28E_(GE)
55
1-1. For safe use
1
Advertisement
Table of Contents
