Table of Contents
Advertisement
272
4-5. Using the driving support systems
Setting up Lexus parking assist-sensor
You can change the buzzer sounds volume and the screen operating conditions.
Press the "SETUP" button.
1
Select "Vehicle", and then select "LEXUS park assist Settings"/"LEXUS Park
2
Assist Settings" on the screen.
Select the desired item.
3
Multimedia screen
The buzzer sounds volume can be adjusted.
1
On or off can be selected for Lexus parking assist-sensor display.
2
Front or rear center sensors display and tone indication can be set.
3
The Lexus parking assist-sensor can be operated when
■
Front corner sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P.
• The vehicle speed is less than approximately 10 km/h (6 mph).
(At any speed when the shift lever is in R)
Front center sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 10 km/h (6 mph).
Rear corner and rear center sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in R.
GX460_OM_OM60R28E_(GE)
Navigation system screen
Advertisement
Table of Contents
