Table of Contents
Advertisement
200
4-3. Operating the lights and wipers
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
2
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
Follow me home system (if equipped)
This system allows the headlights and front position lights to be turned on for 30
seconds when the engine switch is off.
Pull the lever toward you and release it
with the light switch is in
after turning the engine switch off.
Pull the lever toward you and release it
again to turn off the lights.
Daytime running light system
■
To make your vehicle more visible to other drivers during daytime driving, the daytime
running lights turn on automatically whenever the engine is started with the headlight
switch off or in the "AUTO" position. (Illuminate brighter than the front position lights.)
Daytime running lights are not designed for use at night.
Headlight control sensor
■
The sensor may not function properly if an
object is placed on the sensor, or anything that
blocks the sensor is affixed to the windshield.
Doing so interferes with the sensor detecting
the level of ambient light and may cause the
automatic headlight system to malfunction.
GX460_OM_OM60R28E_(GE)
or
Advertisement
Table of Contents
