Controls; Controls At The Left Hand Grip - APRILIA RSV mile Use & Maintenance Book

4
DOWN DOWN
UP UP

CONTROLS

NOTE
The electrical components function only when the igni-
&
tion switch (A) is in the " " (ON) position.
The parking lights are illuminated as well when the ignition
'
switch (A) is in the " " (PARKING) position.

CONTROLS AT THE LEFT HAND GRIP

1) HORN PUSH BUTTON (
The horn sounds when the button is pressed.
2) DIRECTION INDICATOR SWITCH (
To activate the left turn indicator, move the switch to the left.
To activate the right turn indicator, move the switch to the
right. To cancel the turn indicator flashing, press the switch.
46
use and maintenance RSV mille
5
3
(ON) (ON)
A
2
1
/
)
(
)
! - !
RSV mille R
'
3) DIMMER SWITCH (
The dimmer switch has two positions:
– push DOWN, low beam "
– push UP, high beam "
When the button is in the DOWN position indicated by the
'
" ", the parking lights, dashboard light and low beam are illu-
minated.
When the button is in the UP position "
the high beam is illuminated, the dashboard and parking
lights remain on.
Push and release the button DOWN to return to the low beam
'
" ".
4) HIGH BEAM SIGNALING PUSH BUTTON (
tifunction)
Press the button momentarily to flash the high beam for sig-
naling when passing, etc. or in the event you need someone's
attention in an emergency.
This push button, in addition to being the LAP push button,
has the following functions:
– hour and minutes, see p. 44 (SETTING THE HOUR) and
(SETTING THE MINUTES);
– coolant temperature (°C or °F), see p. 44 [SETTING °C
(Celsius degree) OR °F (Fahrenheit degree)];
– chronometer, see p. 45 [CHRONOMETER (RIGHT DIS-
PLAY)].
5) COLD START LEVER (
Operate the cold start (choke) by rotating the lever down-
wards.
To disengage the cold start, return the lever upwards to its ini-
tial position.
(
– )
'
" position;
(
" position.
(
" and released,
#
)/LAP (mul-
%
)