3Com Wireless LAN Controller WX2200 User Manual page 176

176 C 7: M
HAPTER ANAGING AND
M Y
ONITORING OUR
12 To enable countermeasures against rogues detected by radios managed
by this profile, select one of the following from the Countermeasures
Mode pull-down list:
None—Radios do not use countermeasures. This is the default.
All—Radios use countermeasures against devices classified by MSS as
rogues and against devices classified by MSS as interfering devices.
A rogue is a device that is in the 3Com network but does not belong
there. An interfering device is not part of the 3Com network but also is
not a rogue. MSS classifies a device as an interfering device if no client
connected to the device has been detected communicating with any
network entity listed in the forwarding database (FDB) of any WX switch
in the Mobility Domain. Although the interfering device is not connected
to your network, the device might be causing RF interference with MAP
radios.
Rogue—Radios use countermeasures against devices classified by MSS
as rogues, but do not use countermeasures against devices classified
by MSS as interfering devices.
CAUTION: Countermeasures affect wireless service on a radio. When a
MAP radio is sending countermeasures, the radio is disabled for use by
network traffic, until the radio finishes sending the countermeasures.
Configured—Causes radios to attack only devices specified in the
attack list on the WX switch (on-demand countermeasures). When
this option is used, devices found to be rogues by other means, such
as policy violations or by determining that the device is providing
connectivity to the wired network, are not attacked.
N
ETWORK