Configure Employee Access Services; Task Table - 3Com Wireless LAN Controller WX2200 User Manual

52 C 3: C
HAPTER ONFIGURING
Configure
Employee Access
Services

Task Table

W S
IRELESS ERVICES
Services for Employee access are typically configured to provide secure,
encrypted access to the wireless network.
The following sections provide information about how to configure
Employee access:
"Task Table" on page 52
"Step Summary" on page 54
"Example: Configure Employee Access" on page 55
Table 9 on page 52 contains the tasks you need to perform to configure
Employee access services. The summary provides the configurable options
you should set. The section "Example: Configure Employee Access" on
page 55 guides you through the primary wizards and pages in 3WXM to

configure Employee access services.

Table 9 contains the tasks you need to perform to create a service for
employee access. For a summary of configurable items, see "Step
Summary" on page 54. For detailed steps about how to perform each of
these tasks, see "Example: Configure Employee Access" on page 55.
Table 9 Creating a Service for Employee Access
Task Path
"Create a 1 Tool bar option: select
Radio Profile" Configuration.
on page 56
2 Organizer panel: expand
the WX switch.
3 Expand Wireless.
4 Click on Radio Profiles.
5 Select Radio Profile in the
task list.
Primary Parameters to
Configure
From the Create Radio Profile
wizard:
Radio profile name: enter a
name
After you create the service profile,
you can map it to the radio profile.
After you install the MAPs, you can
map their radios to the radio
profile.
Note: The examples in this chapter
configure the radio profile first.
However, you also can configure
the radio profile later as part of
service profile configuration.