3Com Wireless LAN Controller WX2200 User Manual page 115

17 To change the MAP connection type for the redundant connection, select
Direct or Distributed from the MAP Connection Type list.
18 To change the number of redundant connections for the distributed
connection type, type the number in the Redundancy Level box.
For direct connections, the redundancy level is always 1.
19 Click Next. The Capacity Planning for Data page appears.
20 To calculate MAP placement and configuration based on both coverage
and on capacity, enable Use Capacity Calculation for Data. Otherwise,
click Next and go to step 24.
By default, 3WXM performs only the coverage calculation. If you enable
the Use Capacity Calculation for Data option, 3WXM performs both
calculations.
21 In the Per Station Throughput list, specify the throughput (combined
transmit and receive) in kilobits per second (Kbps) for a station.
22 In the Expected Station Count list, specify the number of clients you
expect to be in the coverage area.
Create Your RF Coverage Area 115