Setting Preferences; Easy Configuration Using Wizards; View Topology - 3Com Wireless LAN Controller WX2200 User Manual

26 C 1: G
HAPTER ETTING

Setting Preferences

Easy Configuration
Using Wizards

View Topology

S
TARTED
You can set network and user interface preferences, as well as
preferences for save interval and autosave, certificate handling,
RF monitoring, and logging.
1 Select Tools > Preferences from the 3WXM main tool bar.
The Preferences wizard is displayed.
2 Select any of the tabs, make modifications in the fields, and select Reset
All to reset preferences.
Wizards help walk administrators through configuration steps. There are
many wizards in the 3WXM application.
Enter the required fields and click Next at the bottom of the wizard to
display the next step. Click Cancel to discard any changes made with the
wizard. When you are done, click Finish or OK to save changes.
You can right-click on many objects to display the Insert option. Select
Insert to create a new object that is a "child" of the selected object.
You can display a topology view of managed devices in your WLAN and
their relationships to each other. You can also click on the devices in the
topology view to display summary monitoring information about each
one.
To display a topology view of your network
1 Select the Monitor toolbar option.
2 In the Equipment section of the Organizer panel, select a Mobility
Domain or a WX switch.
3 If not already selected, select Explore from the drop-down list in the
Monitor tab. The topology view of the selected object is displayed.