Create A Radio Profile For Voice; Create A Service Profile For Voice - 3Com Wireless LAN Controller WX2200 User Manual

86 C 3: C
HAPTER ONFIGURING
Create a Radio Profile
for Voice
Create a Service
Profile for Voice
W S
IRELESS ERVICES
This procedure is similar to the procedure in "Create a Radio Profile" on
page 56, but has additional steps to change the delivery traffic indication
map (DTIM) interval to 3.
To create a radio profile for voice service
1 Select Configuration on the toolbar.
2 In the Organizer panel, expand the WX switch.
3 Expand Wireless, then select Radio Profiles.
4 In the Task List panel, select Radio Profile.
5 The Create Radio Profiles wizard is displayed.
6 Enter the name of the radio profile (for example, RadioProfileVoic), then
click Next at the bottom of the wizard.
7 If MAPs are already configured, select the radios to map to the radio
profile, then click Move.
3WXM removes the radios from the radio profile they are in and places
them in the new profile.
If you have not configured the MAPs in 3WXM yet, no radios are listed.
You can map the radios to the radio profile later.
8 Click Finish to save the changes and close the wizard.
The new radio profile appears in the Content panel.
9 If you are configuring voice service for SpectraLink devices, do the
following:
a Select the radio profile in the Radio Profiles table and click Properties.
b Click the 802.11 Attributes tab.
c In the DTIM Period box, change the value to 3.
d Click OK.
The Voice Service Profile wizard tailors its options based on the vendor
you select. The wizard has the following vendor options:
SpectraLink
Avaya
Vocera
Other