Identifying Devices Via Accessible Devices - Siemens SINAMICS Startdrive Getting Started

8.3

Identifying devices via Accessible devices

Identifying devices via Accessible nodes
You can access the connected devices via "Accessible nodes" in the project navigator. The
TIA Portal must be open for this.
1. First of all check the TCP/IP properties of the PC's Ethernet interface in MS Windows and
enter a unique IP address and the subnet mask. The subnet mask is identical for all
nodes (PC, controller, drive).
2. Switch to the TIA Portal. You have already created a new project there.
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015
Drive with control via PROFINET
8.3 Identifying devices via Accessible devices
45