Selecting The Safety Functionality In The Startdrive - Siemens SINAMICS Startdrive Getting Started

9.3

Selecting the safety functionality in the Startdrive

Safety functionality
To edit the safety functions, you must first select the appropriate safety functionality.
1. Click "Select safety functionality" below "Drive functions" > "Safety Integrated" in the
"Function view" tab.
2. In the opened window, you can choose between "Basic functions" and "Extended
functions" depending on the type of the drive device.
Figure 9-1
3. After selecting the safety functionality, the possible safety functions are displayed in the
secondary navigation and in the project window where they can be configured.
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015
Selecting the safety functionality
9.3 Selecting the safety functionality in the Startdrive
Safety Integrated
67