Introduction; Subject; Applicable Systems - Nortel 1000 Manual

.

Introduction

This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.

Subject

This Nortel technical publication (NTP) provides information specific to the
implementation of the Fiber Remote Intelligent Peripheral Equipment (IPE)
service.
It describes the operation of the fiber-optic equipment and provides
specific information on how to install and maintain this equipment as an
integral part of a system. Fiber Remote IPE configuration procedures
are identical to the equivalent non-fiber equipment. However, there are
some additional software commands that can be executed using the
Man-Machine Interface (MMI) terminal to specifically control fiber-optic
equipment.
Note on legacy products and releases
This NTP contains information about systems, components, and features
that are compatible with Nortel Communication Server 1000 Release 4.5
software. For more information on legacy products and releases, click the
Technical Documentation link under Support & Training on the Nortel
home page:
www.nortel.com

Applicable systems

This document applies to the following systems:
•
Communication Server 1000M Half Group (CS 1000M HG)
•
Communication Server 1000M Single Group (CS 1000M SG)
•
Communication Server 1000M Multi Group (CS 1000M MG)
•
Meridian 1 PBX 51C
•
Meridian 1 PBX 61C
Nortel Communication Server 1000
Fiber Remote IPE Fundamentals
NN43021-554 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
11