Selecting The Fiber Superloop Network Card Slot - Nortel 1000 Manual

50 Equipment installation and configuration
Figure 8
Fiber-optic link

Selecting the Fiber Superloop Network card slot

The position of the NT1P61 Fiber Superloop Network card in the local
system depends on the system type installed at the local site. The system
type determines what type of module will house the card.
Table 8 "Modules supporting a Fiber Superloop Network card" (page
50) lists modules that provide network card slots, the system options
where these modules are used, and card slots where network cards can
be housed.
Table 8
Modules supporting a Fiber Superloop Network card
Modules
NT4N41
Core/Network
module
NT5D21
Core/Network
module
NT8D35 Network
module
System
Meridian 1 PBX 61C, Meridian 1 PBX
81C, CS 1000M SG, CS 1000M MG
Meridian 1 PBX 51C,
Meridian 1 Option 61C,
Meridian 1 Option 81C,
CS 1000M SG, CS 1000M MG
Meridian 1 Option 81,
Meridian 1 Option 81C,
Meridian 1 PBX 81C,
CS 1000M MG,
Nortel Communication Server 1000
Fiber Remote IPE Fundamentals
NN43021-554 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Network card
slot
Card slots 0–7
Card slots 0–7
Card slots 5–12