Xerox Telecopier 7033 Service Manual page 267

7. The LAN Fax Server locates the EXPRESS.SYS file and downloads the
file. The indication is both Red and Green LED's are ON during
downloading (Normal time is about 3-5 sec., Maximum 30 sec.).
Y N
| Go to RAP 1.2.5
8. The LAN Fax Server PWB searches the file server for the
EXPRESS.OUT file. The indication is the Green LED is OFF and the
Red LED is ON (Normal time is about 9-11 sec., Maximum 30 sec.).
Y N
| Go to RAP 1.2.6
9. The LAN Fax Server locates the EXPRESS.OUT file and downloads the
file. The indication is both Red and Green LED's are ON during
downloading (Normal time is about 27 sec., Maximum 35 sec.).
Y N
| Go to RAP 1.2.7
10. The LAN Fax Server PWB boot sequence has completed. The Green
LED is ON and Red LED is OFF.
Y N
| Go to RAP 1.2.8
11. A printer configuration report is printed on the 7033 terminal.
Y N
| Go to RAP 1.2.14
12. After the boot sequence completed correctly (Green LED ON, Red
LED OFF). The indications changed to Green and Red LED's ON.
Y N
| Go to Step 14.
13. Perform RAP 1.2.9
Problem was corrected
Y N
| Call for assistance.
Telecopier 7032 / 7033 Service Manual
14. After the boot sequence completed correctly (Green LED ON, Red
LED OFF). The indications changed to Green LED OFF and Red LED
blinking.
Y N
| Go to Step 16
15. Perform RAP 1.2.10
Problem corrected.
Y N
| Call for assistance.
16. After the boot sequence completed correctly (Green LED ON, Red
LED OFF). The indications changed to Green LED is OFF and the
Red LED is ON
Y N
| Go to Step 18
17. Perform RAP 1.2.11
Problem corrected.
Y N
| Call for assistance.
6/92
www.printcopy.info
8h-3
RAP 1.2.1