Xerox Telecopier 7033 Service Manual page 17

OPXX Error Codes
Code
OP46 PAPER TRAY IS NOT SET-
PLEASE CHECK PAPER TRAY
OP49 BLANK DISPLAY
OP50 BLANK DISPLAY
OP51 BLANK DISPLAY
OP62 CALL UNSUCCESSFUL
WAITING FOR AUTO REDIAL ATTEMPT
AUTO REDIAL ATTEMPTS UNSUCCESSFUL
PLEASE TRY AGAIN-CHECK WITH REMOTE
OP64 CALL UNSUCCESSFUL
WAITING FOR AUTO REDIAL ATTEMPT
AUTO REDIAL ATTEMPTS UNSUCCESSFUL
PLEASE TRY AGAIN-CHECK WITH REMOTE
OP65 CALL UNSUCCESSFUL
WAITING FOR AUTO REDIAL ATTEMPT
AUTO REDIAL ATTEMPTS UNSUCCESSFUL
PLEASE TRY AGAIN-CHECK WITH REMOTE
OP66 CALL UNSUCCESSFUL
WAITING FOR AUTO REDIAL ATTEMPT
AUTO REDIAL ATTEMPTS UNSUCCESSFUL
PLEASE TRY AGAIN-CHECK WITH REMOTE
Telecopier 7032 / 7033 Service Manual
(continued)
Message on display
NOTE: Error occurs only when auxiliary tray is
OP46 installed.
Check position of paper size sensor actuators on
paper tray.
Check/replace paper size sensor (RAP2.20). Check
paper tray set-up in Section 6.
Clear + Stop depressed during RS232 job. Try
operation again.
RS232 job abandoned due to power interuption
RS232 scan pause abanded because document (s)
were removed from the ADF
Perform RAP 2.16.
OP62
Perform RAP 2.16.
OP64
Perform RAP 2.16.
OP65
Perform RAP 2.16.
OP66
8/91
2-7
www.printcopy.info
Corrective action
Error Codes