Maintenance and servicing
10.5 Replacing the processing unit
Restarting the device
● No operating, user or factory data is saved on the basic device. The new PU is provided
● Restart the device with the analyzer modules installed last.
● Subsequent to switching on the device, the AMs are recognized as new. Each AM retains
● The configuration of the basic device (operating data) is restored from the memory of
● For further steps, please contact the service department.
66
with the most recent firmware.
its parameter settings.
analyzer module AM1.
Operating Instructions, 01/2013, A5E31930403-01
Wall-mounted device