10.4
Replace basic device
The basic device is completely parameterized, the serial number and factory data are saved.
1. Fit the previously used analyzer module (AM) into the new basic device.
2. Enter the user-specific parameters of the basic device again or, if they have been saved
Wall-mounted device
Operating Instructions, 01/2013, A5E31930403-01
– Subsequent to switching on the device, the AM is recognized as new.
– Each AM retains its parameter settings.
on a PC using Simatic PDM, download these to the device.
Maintenance and servicing
10.4 Replace basic device
63