Braun ThermoScan IRT3030LA Manual page 6

1. To turn the thermometer on, push the «start» button
During an internal self-check, the display
shows all segments.
The reading showed on the screen is the
last temperature taken.
Flashing symbol of lens filter will appear if
no lens filter is attached. Temperature can
be taken only if lens filter is mounted on
the probe.
The thermometer is ready to use after two
beeps are sounded and the non-flashing
ear icon appears.
2. Fit the probe (3) snugly into the ear canal,
then push the «start» button (4).
One beep signals normal temperature.
Audio fever indicator will trigger 2
consecutive beeps when the reading is
equal or higher to 37.5 °C and 4 beeps
if the reading is equal or higher to 38.6 °C.
The result is shown on the display (7).
3. Gently pull off the disposable lens filter (2).
Do not use force in removing the
disposable lens filter.
4. Put on a new, clean, disposable lens filter by
snapping into position.
5. Place the protective cap on (1).
The Braun ThermoScan Ear thermometer
turns off automatically after 60 seconds of
inactivity. The thermometer can be turned off
by pressing and holding the start button for
more than 5 seconds.
4
(4).