Download Print this page

Checking The Maximum&Minimum Burner Pressure; Checking Slow Ignition Power; Controllo Della Pressione Max&Min Al Bruciatore; Controllo Della Pressione Di Lenta Accensione - Ariston NEXT EVO X OUTDOOR Series User Manual

Advertisement

commissioning
Checking the maximum and minimum pressure
(see the Gas setting table)
1.
Close the gas valve.
2.
Loosen screw "a" and insert the manometer connection pipe
into the pipe tap.
3.
Open the gas valve.
4.
Press the On/Off button the display will illuminate.
5.
Open one hot water tap.
Simultaneously press the
seconds. The display shows26.
6.
Press the On/Off, appliance forced to maximum power. The
display shows a number from "00" to "99".
7.
On the manometer verify the pressure and if necessary
press the the
and
burner pressure as indicated on the gas settings table.
8.
Press the On/Off, appliance forced to minimum power. The
display shows a number from "00" to "99".
9.
On the manometer verify the pressure and if necessary
press the the
and
burner pressure as indicated on the gas settings table.
10. Press the On/Off button to confirm.
11. Close Hot water tap. Switch off the appliance through ON/
OFF button.
12. Tighten the connector screw tightly and check for leaks
using a suitable device

Checking slow ignition power

(see the Gas setting table)
1.
Close the gas valve.
2.
Loosen screw "a" and insert the manometer connection
pipe into the pipe tap.
3.
Open the gas valve.
4.
Press the On/Off button the display will illuminate.
5.
Disconnect and reconnect the power supply.
6.
Press simultaneously press the
for 3 seconds. The display showsL6, ppliance forced to
ignition power. Open one hot water tap.
7.
On the manometer verify the pressure and if necessary
press the
or
pressure as indicated on the gas settings table.
8.
Press the ON/FF button to save the change.
9.
Close Hot water tap. Switch off the appliance through ON/
OFF button.
10. Close Hot water tap. Switch off the appliance through ON/
OFF button.
11. Tighten the connector screw tightly and check for leaks
using a suitable device
32
and
(2) buttons for 5
(2) buttons to adjust maximum
(2) buttons to adjust minimum
(2) buttons
or
(2) buttons to adjust the slow ignition
messa in funzione
Controllo della pressione massima e minima al
bruciatore
(vedi Tabella riepilogativa gas)
1.
Chiudere il rubinetto del gas.
2.
Allentare la vite "a" ed inserire il tubo di raccordo del
manometro nella presa di pressione.
3.
Aprire il rubinetto del gas.
4.
Premere il tasto ON/OFF. Il display si illumina.
5.
Aprire un rubinetto dell'acqua calda, l'apparecchio si attiva.
Premere contemporaneamente i tasti 2
secondi, il display visualizza 26
6.
Premere il taso ON/OFF, l'apparecchio è forzato alla
massima potenza. Il display visualizza un numero da "00" a
"99".
7.
Verificare sul manometro la pressione massima e se
necessario modificarla premendo i tasti
come indicato nella tabella riepilogativa gas.
8.
Premere il tasto ON/OFF, per forzare l'apparecchio alla
minima potenza.Il display visualizza un numero da "00" a
"99".
9.
Verificare sul manometro la pressione minima e se
necessario modificarla premendo i tasti
come indicato nella tabella riepilogativa gas.
10. Premere il tasto ON/OFF per memorizzare le eventuali
modifiche.
11. Chidere il rubinetto dell'acqua calda. Premere il tasto ON/
OFF per spegnere l'apparecchio

Controllo della pressione di lenta accensione

(vedi Tabella riepilogativa gas)
1.
Chiudere il rubinetto del gas.
2.
Allentare la vite "a" ed inserire il tubo di raccordo del
manometro nella presa di pressione.
3.
Aprire il rubinetto del gas.
4.
Premere il tasto ON/OFF. Il display si illumina.
5.
Scollegare e ricollegare l'alimentazione elettrica.
3.
Premere contemporaneamente i tasti 2
secondi, il display visualizza L6, l'apparecchio è forzato
alla potenza di accensione.
dell'acqua calda.
7.
Verificare sul manometro la pressione e se necessario
modificarla premendo i tasti 2
nella tabella riepilogativa gas.
8.
Premere il tasto ON/OFF per memorizzare la modifica.
9.
Chiudere il rubinetto dell'acaqua calda. Premere il tasto
ON/OFF per spegnere l'apparecchio
e
per 5
e
2
e
2
e
per 3
Aprire
un
rubinetto
e
come indicato

Hide quick links:

Advertisement

loading