General Instructions; Toolkit - BMW R nineT 2019 Rider's Manual

General instructions

8
The "Maintenance" chapter de-
scribes straightforward proced-
92
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your motorcycle are listed
in the section entitled "Technical
data".
Further information on mainten-
ance and repair work is available
z
from your BMW Motorrad author-
ised dealer in the form of a DVD.
Some of the work requires spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.

Toolkit

1 Open-ended spanner
Width across flats 14/17
Adjusting mirror arm
( 60).
Adjusting spring preload
for front wheel (
2 Reversible screwdriver
blade
With star-head and plain-
tip ends
Adjust the rebound-
stage damping for front
wheel ( 66).
2 Adjusting compression-
stage damping for front
wheel (
Adjusting the damping
characteristic for rear
wheel (
Replacing bulb for front
and rear turn indicators
( 114).
3 Screwdriver handle
Topping up the engine
oil (
Use with screwdriver in-
sert.
4 Torx wrench, T20
Replacing bulb for low-
63).
beam and high-beam
headlight (
Replacing bulb for side
light (
5 Plastic cap
Adjusting spring preload
for front wheel (
65).
67).
96).
112).
113).
63).