BMW R nineT 2019 Rider's Manual page 100

8
98
Brake-pad wear limit,
front
1.0 mm (friction pad only,
z
without backing plate. The
wear indicators (grooves) must
be clearly visible.)
If the wear indicating marks are
no longer clearly visible:
WARNING
Brake-pad thickness less
than permissible minimum
Diminished braking effect, dam-
age to the brakes
In order to ensure the depend-
ability of the brake system, do
not permit the brake pads to
wear past the minimum per-
missible thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Check rear brake pad
thickness
Place the motorcycle on its
stand on firm, even ground.
Visually inspect the brake pads
to ascertain their thickness.
View: from the left towards the
brake caliper.