BMW R nineT 2019 Rider's Manual page 122

8
120
Press the hook 1.
The fuse box is unlocked and
it is possible to pull it towards
the left to loosen it from the
z
bracket 2.
Pull the fuse box from the
bracket 2.
Press the lock 4 on both sides
and remove the cap 3.
NOTICE
If fuse defects recur frequently
have the electric circuits checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Consult the fuse assignment
diagram below and replace the
defective fuse.
Fuse assignment ( 120)
Reinstall the cap 3. Make sure
the lock 4 engages.
Push the fuse box into the
bracket 2 until the hook 1 en-
gages.
Installing front seat (
Install the rear seat (
Fuse assignment
56).
57).
Fuse 1
10 A (Instrument cluster, alarm
system DWA, ignition switch,
OBD diagnostic socket, cut-off
relay coil)
Fuse 2
4 A (ABS control unit, engine
control unit, output of isolat-
ing relay, speedometer, rev
counter, alternator)