JETWAY NF9T Series Technical Manual page 43

The optional settings: [Disabled]; [Enabled].
When set as [Enabled], a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Power Technology
The optional settings: [Disabled]; [Energy Efficient].
 PPM Configuration
Press [Enter] to make settings for PPM Configuration:
PPM Configuration:
EIST
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable Intel SpeedStep.
CPU C Status Report
Use this item to enable or disable CPU C status report to OS.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Enhanced C state
Use this item to enable or disable Enhanced CPU C state.
Max CPU C-state
Use this item to controls Max. C state that processor will support.
The optional settings: [C7]; [C6]; [C1].
 SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Port
The optional settings are: [Enabled]; [Disabled].
SATA Mode
The optional settings are: [IDE Mode]; [AHCI Mode].
SATA Speed Support
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Gen1]; [Gen2].
SATA ODD Port
38