JETWAY NF9T Series Technical Manual page 39

WatchDog Wake-up Timer in ERP
This item support WDT wake-up while ERP function is set as [Auto].
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value in ERP
User can set a value in the range of 10 to 4095.
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select 'AT or ATX Mode' on MB jumper at first (ATX Mode &
AT Mode Select).
Case Open Detect
This item controls detect case open function.
The optional settings are: [Enabled]; [Disabled].
PS2 KB/MS Connect
Use this item to set PS/2 connect primary device.
The optional settings are: [Keyboard First]; [Mouse First].
 SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFan Configuration
CPUFAN / SYSFAN1/2 Smart Mode
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/2 Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/2 full speed temperature. Fan will run at
full speed when above this pre-set temperature.
CPUFAN / SYSFAN1/2 Full-Speed Duty
Use this item to set CPUFAN/SYSFAN1/2 full speed duty. Fan will run at full speed
when above the pre-set duty.
34