Install Settings; Inverter Id - Delta RPI M30A_120 Operation And Installation Manual

5.2.7 Install Settings

- The settings in Install Settings page can only be adjusted by qualified
installers or engineers. Changing these settings may result in damage
to the inverter and other equipment.
To enter Install Settings page, users have to enter correct password.
There are 3 sets of password with different permissions: user level, installer level,
and manufacturer level. The following sub-sections will introduce the setting
items in Install Settings page of user level and installer level.

5.2.7.1 Inverter ID

Inverter ID is used in RS-485 communication, for PC recognizing the inverter.
If users connect several inverters together via RS-485, each inverter must have
different ID.
Inverter ID: 002
Insulation
Country
Grid Settings
CAUTION !
Inverter ID: 002
Insulation
Country
Grid Settings
DC Injection
Dry Contact
RCMU
EPO Normal Close
AC Connection
Anti-islanding
33000W
Max Power
Return to Factory
Figure 5-9 : Install settings page
Figure 5-10 : Inverter ID page
User Level:
- Inverter ID
- Insulation
- Country
- Dry Contact
- EPO
- AC Connection
- Max. Power
Installer Level:
- Inverter ID
ON
- Insulation
- Country
- Grid Settings
- Dry Contact
- EPO
3P4W
- AC Connection
ON
- Max. Power
Manufacturer Level:
- All Settings
ENT
EXIT
47
Turn On PV Inverter
Setting ID:
ID = 002