Sorting And Clearing Tv Channels Manually; Setting The Clock; Setting The Rf Out Channel; Decoder Allocation - Philips DVP620VR/05 User Manual

Sorting TV channels manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions (pro-
gramme numbers) of the DVD/ VCR.You can use this function
to individually sort the TV channels already saved.
The clock resets automatically
If you save a TV channel that transmits VPS/ PDC or the Teletext
on programme number 'P01', date and time will constantly be
updated. As a result, time changes, i.e. daylight savings time, will be
set automatically.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select "TUNER SET
UP" , then press B.
3 Press K/L to select "MOVE" , then
press B.
4 Press K/L to select the saved TV
channel that you want to change.
5 Confirm with B.
6 Move the selected channel with K/L to the programme num-
ber you want to assign.
7 Confirm with B.
8 To assign other TV channels to a programme number, repeat
steps 4 to 7.
9 Confirm the assignment of the TV channel with MOVE menu.
10 To exit the MOVE menu, press STATUS/EXIT.

Setting the clock

If the display shows an incorrect time or " --:-- ", the time and
date must be reset manually.
If a TV channel that transmits VPS/PDC or the Teletext is
stored under programme number "P01", time/date will auto-
matically be taken from VPS/PDC or the Teletext information.
(SMART CLOCK)
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select "INITIAL SET UP" , then press B.
3 Press K/L to select "CLOCK" , then press B.
4 Check the time in "TIME". If
required, please change the time
with numerical key pads.
5 Check "DAY", "MONTH" and
"YEAR" in the same way.
6 Choose "SMART CLOCK" [ON]
or [OFF] with B.
7 To end, press STATUS/EXIT.
Time/date is displayed incorrectly despite manual setting
With Smart Clock, time/date is taken from the TV channel saved
on 'P01'.
If you wish to switch this automatic time cor-rection off, select
'OFF' for Smart Clock.
You can reactivate this function at anytime by selecting 'ON' for
Smart Clock.
MOVE
P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT K L CHOOSE B
END=EXIT
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Setting Up your DVD/VCR

Setting the RF out channel

In some reception locations it is possible that a TV channel will
be sent on the same or similar frequency as the DVD/ VCR.
Result: As soon as the DVD/ VCR is switched on, the reception
quality for this or several other TV channels will decrease.
The following steps will show you how to change the pre-set
'transmission' (RF out channel) frequency on the DVD/ VCR.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select "INITIAL SET UP" , then press B.
What is RF out channel?
This electronic component in the DVD/ VCR allows the device to
transmit audio and video signals via the aerial cable.These signals
can be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel on which the
audio or video signal is transmitted.
3 Press K/L to select "RF OUT" ,
then press B.
4 Press B.
5 Press K/L or numerical key pads
to select a free (not allocated)
channel between channel 22 and 69
in your area.
6 Press B.
7 To end, press STATUS/EXIT.
If you cannot get an interference-free picture and sound, connect
the DVD/ VCR and the TV with a scart cable.Then, switch the
built-in modulator off.
Press L repeatedly until '--' appears next to 'RF OUT CH' on the
TV screen.
Then confirm with B.

Decoder allocation

Some TV channels transmit encoded TV signals which can only
be viewed with a purchased or rented decoder.You can con-
nect such a decoder to this DVD/ VCR.The following function
will automatically activate the connected decoder for the
desired TV channel.
1 Switch the TV on. If applicable, select the programme number
for the DVD/ VCR operation.
2 Press K/L or numerical key pads to select the TV channel
which you would like to allocate
the decoder to.
3 Press DISC/VCR MENU.The main
menu will appear.
4 Press K/L to select "TUNER SET
UP".Then press B.
5 Press K/L to select "MANUAL
TUNING".Then press B.
6 Press K/L to select "DECODER".
7 Press B to select "[ON]" (Decoder switched on).
How can I switch off the decoder?
Use B to select "[OFF]" (Decoder switched off).
8 To end, press STATUS/EXIT.
The decoder has now been allocated to this programme num-
ber.
SELECT K L CHOOSE B
RF OUT CH 35
END=EXIT
MANUAL TUNING
PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT K L CHOOSE B
END=EXIT
9