Playing A Disc; Basic Playback; General Features; Pause - Philips DVP620VR/05 User Manual

Playing a Disc

Basic Playback

DVD-V
Getting Started
Turn on the power of the TV, amplifier and any other compo-
nents which are connected to the DVD/VCR.
Make sure the TV and audio receiver (commercially available)
are set to the correct channel.
1 Press STANDBY-ON.
2 Press DVD, then OPEN/CLOSE to open disc loading tray.
3 Place the chosen disc in the tray, with the
label facing up.
4 Press PLAY B B .
• The tray will close automatically, and play-
back will then start from the first chapter
or track of the disc. If the playback does
not start automatically, press PLAY B.
• When you playback the DVD which a title menu is recorded, it
may appear on the screen. In this case, refer to 'TITLE MENU'.
5 Press STOP C to stop playback.
Notes:
- A "prohibited icon" may appear at the
top-right on the TV screen during opera-
tion, warning that a prohibited operation
has been encountered by the DVD/VCR or the disc.
- With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
- During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
- DVDs recorded with the NTSC system can playback
with this unit via a PAL system TV set.
- Depending on the TV, when playing back a NTSC DVD
on a PAL TV, the picture may roll up or down, shrink ver-
tically and black bars may appear at the both top and
bottom of the screen.
- It may take a time to deliver the picture or the sound.
This is not a malfunction.
Cancelling and Calling Back PBC Function
When playing Video CDs with PBC function, some operations (e.g.
select and repeat tracks) cannot be performed unless the PBC
function is cancelled temporarily.
1 Insert a Video CD.
• Title menu will appear on the display.
• Playback will start automatically.
2 Press STOP C.
3 Press the number buttons to enter the desired Track number.
• PBC function is now cancelled and the playback of the Video
CD will start.
4 To call back PBC function, press STOP C twice, and then press
PLAY B.

General Features

DVD or Video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical key
pads or use Arrow ( /
L
in the DVD main menu and press OK to confirm.
Note:
- Unless stated, all operations described are based on
remote control use. Some operations can be carried out
using the menu bar on the TV screen.

Pause

CD
DVD-V
1 During playback, press PAUSE k.
• Playback will pause and sound will be muted.
2 To continue playback, press PLAY B B .
Note:
- Set "STILL MODE" to "FIELD" in the Display menu if pictures
in the pause mode are blurred. (refer to 'DISPLAY SETTING')
16
VCD
CD
MP3 JPEG
VCD
CD
MP3
DVD-V
/ B / s ) to highlight your selection
K
VCD
MP3 JPEG

Disc Menus

1 Press DVD, then DISC/VCR MENU.
• The DVD main menu will appear.
2 If the feature is not available, "
the TV screen.
3 If disc menu is available on the disc, audio language, subtitle options,
chapters for the title and other options will appear for selection.
4 Press Arrow ( L / K / B / s ) to select an item, and "OK" to
confirm selection.

Title Menu

1 Press DVD, then TITLE.
• The title menu will appear.
2 If the feature is not available, "
the TV screen.
3 Press Arrow ( L / K / B / s ) to select an item, and "OK" to
confirm selection.
• Playback will begin at the selected Title.
VCD
1 The title menu will appear.
2 Press numerical key pads to select the menu.
• Playback will start.

Calling Up a Menu During Playback

• Press DISC/VCR MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
Note:
- Contents of menus and corresponding menu operations
may vary between discs. Refer to the manual accompa-
nying the disc for details.

Step by Step Playback

1 During playback, press PAUSE k.
• Playback will pause and sound will be muted.
2 The disc goes forward by one frame each time PAUSE is pressed.
3 To exit step by step playback, press PLAY B.
Note:
- Set 'STILL MODE' to 'FIELD' in the DISPLAY menu if
pictures during step by step playback are blurred. (refer
to 'DISPLAY SETTING')

Resume

1 During playback, press STOP C.
• Resume message will appear on the TV screen.
2 Press PLAY B, playback will resume from the point at which
playback was stopped.
• To cancel resume, press STOP C twice.
Notes:
JPEG
- For MP3 files, playback will resume from the beginning
of the track at which playback was stopped.
- If you turn the DVD/VCR off, Resume function will be
cancelled.

Fast Forward / Reverse Search

CD
DVD-V
1 During playback, press g or h repeatedly to select the required
forward or reverse speed.
• For DVDs and Video CDs, fast forward or reverse search
speed is different depending on the disc.
• For DVDs, approximate speed is 1(x2), 2(x8), 3(x50), and 4(x100).
• For Video CDs, approximate speed is 1(x2), 2(x8), and 3(x30).
• For Audio CDs, approximate speed is x16.
• For MP3, approximate speed is x8.
2 To return to normal playback, press PLAY B.
DVD-V
" symbol may appear on
DVD-V
" symbol may appear on
VCD
DVD-V
VCD
CD
MP3
DVD-V
VCD
MP3
JPEG
DVD-V
JPEG