Philips Consumer Electronics Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Copyright 2004 Philips.All rights reserved. Page 2 This Class B digital apparatus This equipment has been tested and found to comply...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 4 Introduction Welcome! This DVD/VCR combines a Digital Video Disc (DVD) Player and a Hi-Fi Video Cassette Recorder (VCR) into one unit, letting you play DVDs,Audio Compact Discs (Audio CDs), and Video Cassettes on one piece of equipment. Read this owner’s manual carefully to learn how to use the features listed below.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Playable Discs The DVD Player will play Digital Video Discs (DVDs);Audio Compact Discs (CDs); finalized Digital Video Discs Rewritable (DVD+RW); finalized Compact Discs Rewritable (CD-RW) and Compact Discs Recordable (CD-R); and Video Compact Discs (VCDs). To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 6 Hookups Determining the best possible connection... Your hookup will be determined primarily by your existing equipment, especially your TV. However, the following guidelines describe which options have the best picture (video) and sound (audio) quality.You will not use all the jacks on the DVD/VCR.
Page 7
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Simplest connection using only the supplied black RF coaxial cable This connection will let you use the features of both the VCR and the DVD Player. DVD/VCR DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT AUDIO IN VIDEO OUT AUDIO OUT COAXIAL VIDEO OUT...
Page 8
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 8 Hookups (cont’d) DVD/VCR to Cable Box or Satellite Receiver and TV This connection will let you use the features of both the VCR and the DVD Player. Cable Box/Satellite Receiver DIGITAL AUDIO OUT Cable COAXIAL Signal RF coaxial cable Connections...
Page 9
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM DVD/VCR to Cable Box or Satellite Receiver and TV This connection will let you use the features of both the VCR and the DVD Player. DVD/VCR ANT - IN ANT-OUT RF coaxial cable Connections Connect a Cable TV or Satellite signal to the DVD/VCR’s ANT -IN (Antenna In) jack.
Page 10
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 10 Hookups (cont’d) DVD/VCR to a TV that has Audio and Video In jacks Using the supplied red, white, and yellow cables This connection will let you use the features of both the VCR and the DVD Player. DIGITAL AUDIO OUT COAXIAL...
Page 11
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM DVD/VCR to a TV that has Component Video In jacks DIGITAL AUDIO OUT COAXIAL Connect the antenna or Cable TV signal to the ANT -IN (Antenna In) jack of your DVD/VCR. Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV.
Page 12
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 12 Hookups (cont’d) DVD/VCR to a TV that has an S-Video In jack DIGITAL AUDIO OUT COAXIAL Connect the antenna or Cable TV signal to the ANT -IN (Antenna In) jack of your DVD/VCR. Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV.
Page 13
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM VIDEO IN Connect the antenna or Cable TV signal to the ANT -IN (Antenna In) jack of your DVD/VCR. Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo.
Page 14
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 14 Hookups (cont’d) DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible Stereo COAXIAL DIGITAL AUDIO IN Connect the antenna or Cable TV signal to the ANT -IN (Antenna In) jack of your DVD/VCR. Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL AUDIO IN jack on the Stereo.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Putting Batteries in the Remote Control Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid. Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 16 First-time DVD/VCR Setup Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly. You cannot program channels if you are using a Cable Box or a Satellite Receiver.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Read and follow the steps below to play a tape. Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel. This depends on how you connected the DVD/VCR to a TV. Details are on pages 6-14.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 18 Disc Playback Before you begin, turn on the TV, Stereo, and other equipment connected to the DVD/VCR. Make sure the TV and the Stereo (if applicable) are set to the correct channel. Details are on pages 6-14. Press STANDBY-ON y y to turn on the DVD/VCR.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Display Messages about current Disc operations appear here. See Display Messages below. STANDBY-ON POWER ON VIDEO AUDIO Appears when a repeat function is active Appears when A-B Repeat is on Appears when ALL Repeat is on Appears when Disc play is paused Appears during slow...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 20 Display Panel (VCR) Cassette Compartment Insert a video cassette here. STANDBY-ON POWER ON VIDEO AUDIO F.FWD Indicates a tape is in the DVD/VCR. Appears if Repeat Play is active Appears if tape play is paused or during slow motion tape play Appears during...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM AUDIO and VIDEO In Jacks Connect audio and video cables from a camcorder,VCR, etc. here. This will be useful if you want to copy a videotape or watch material that is playing on other equipment. Details are on page 34. STANDBY-ON y y Button Press to turn the power on or off.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 22 Rear Panel DVD/VCR AUDIO OUT Jacks Left (white) and Right (red) Connect the supplied audio cables here and to the Audio In jacks of a TV or Stereo. Details are on pages 10-13. These jacks provide audio for both the DVD Player and the VCR.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM SEARCH Button In DVD mode, press to search for a specific Title/Chapter/Track/Time. Details are on pages 49-50. In VCR mode, press for a Time Search or an Index Search. Details are on page 41. REPEAT Button Press to play a Track, Audio CD, Title, or Chapter repeatedly.
Page 24
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 24 Remote Control (cont’d) MODE Button Press to set a Program. Details are on page 59. Press to start Random playback. Details are on page 60. ZOOM Button Press to enlarge the DVD, Video CD, or JPEG image. Details are on page 58.
H9622MD(EN)1_46.qx4 04.5.11 11:40 AM Although your DVD/VCR may automatically memorize the channels you receive when you turn it on for the first time, you can set up the channels again. Press VCR, then press DISC/VCR/MENU so MENU appears. - M E N U - BTIMER PROGRAMMING AUTO REPEAT [OFF]...
H9622MD(EN)1_46.qx4 04.5.11 11:40 AM 26 Channel Setup (cont’d) Adding/Deleting Channels You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Press VCR, then press DISC/VCR/MENU so MENU appears. Press o or p to select CHANNEL SET UP, then press B.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Follow these steps to set the VCR clock. Make sure: ● The DVD/VCR is on and in VCR mode. Press VCR so the VCR light appears on the front of the DVD/VCR. Press VCR, then press DISC/VCR/MENU so MENU appears.
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 28 Clock (VCR) (cont’d) While the HOUR space is flashing, press o or p until the hour appears.Then, press B. CLOCK SET MONTH DAY YEAR 0 3 / 2 1 SAT 2 0 0 4 HOUR MINUTE AM/PM 0 5 : –...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Follow the steps below to change the language of the VCR on- screen displays and menus. Press VCR, then press DISC/VCR/MENU so MENU appears. - M E N U - BTIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM 30 VCR Status Displays You may access status displays by pressing DISPLAY.The displays may include the current time, channel, and other information. Press DISPLAY. The COUNT display will appear for five seconds. After five seconds, only the real-time tape counter will appear.This counter shows you the elapsed playing time of the tape (from the point at which the counter was set to zero).The counter also will appear on the display...
H9622MD(EN)1_46.qx4 04.4.8 5:03 PM Read and follow the steps below to record a television program onto a videotape. Before you begin, make sure the DVD/VCR is in VCR mode. Press VCR so the VCR light appears on the front of the DVD/VCR.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 32 Recording One Channel/Watching Another Press VCR, then press RECORD current TV channel. Details are on page 31. Press VCR/TV once to put the DVD/VCR in TV position. The VCR light will disappear from the DVD/VCR’s display panel. Use the TV remote control to select the channel you want to watch at the TV.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM One-Touch Recording (OTR) lets you set a timed recording 30 minutes to eight hours long of the current TV channel. Before you begin: ● Place the DVD/VCR in VCR mode. Press VCR so the VCR light appears on the front of the DVD/VCR.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 34 Rerecording (Tape Duplication) These instructions show you how to copy videotapes.The illustration uses two DVD/VCRs. Other VCRs or Camcorders may operate differently. 1. Audio cables from AUDIO OUT jacks (red and white) of DVD/VCR 1 to AUDIO IN jacks of DVD/VCR 2 DIGITAL COMPONENT AUDIO...
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM Follow the steps below to program the VCR of the DVD/VCR to record TV programs while you’re away from home. Before you begin: ● Set up the TV channels at the DVD/VCR. Details are on page 25. ●...
Page 36
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 36 Timer Recording (cont’d) To enter the recording date, press o or p until the month appears.Then, press B. Next, press o or p until the day appears.Then, press B. The day of the week will appear. You cannot record more than one year in advance.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM Press o or p to select a recording tape speed. The arrow will appear beside your choice.The selected speed will flash beside REC SPEED. Details about tape speed are on page 71. ONE TIME PROGRAM PROGRAM NUMBER DATE 0 5 / 0 4 TUE START TIME...
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 38 DVD to Videotape Duplication Follow the steps below to copy a DVD to a videotape. This will be possible only if the DVD is not copy protected. Before you begin: ● Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the DVD.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM Follow the steps below to play a videotape repeatedly. Press VCR, then press DISC/VCR/MENU. Screen menu will appear. - M E N U - BTIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON]...
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 40 Tape Counter Follow the steps below to reset the VCR’s real-time tape counter to zero at a tape location you want to refer to later. Press VCR, then play, fast forward, or rewind a tape to the location that you would like to refer to later.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM Time Search Follow the steps below to search forward or backward on a tape a specific length of time.There must be a tape in the cassette compartment. Press VCR, then press SEARCH until the TIME SEARCH screen appears. TIME SEARCH - : - - Within 30 seconds, press o or p until your desired...
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 42 Special Effects Playback ● Before you begin, press VCR so the VCR light appears on the front of the DVD/VCR. Forward and Reverse Searching (SP/LP/SLP) During tape playback, press and release g or h. A fast forward or reverse picture search will begin. To return to playback, press PLAY B.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM The following tape features are available in VCR mode. Press VCR so the VCR light is on, if necessary. Automatic Playback When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin. If a timer recording is set and the power will not come on automatically when you insert a tape with the record tab intact.
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 44 Multi-Channel Television Sound Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language).
Page 45
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM To set the DVD/VCR to receive programs in stereo or second audio, follow these steps. Press VCR, then press DISC/VCR/MENU so MENU appears. - M E N U - BTIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT...
H9622MD(EN)1_46.qx4 04.4.8 5:04 PM 46 Hi-Fi Stereo Multi-Channel Television Sound system broadcasts are recorded in Hi-Fi stereo.To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, follow these steps. Press VCR, then press DISC/VCR/MENU so MENU appears. - M E N U - BTIMER PROGRAMMING AUTO REPEAT [OFF]...
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM DVDs contain menus that describe the contents of the DVD or allow you to customize DVD playback. For example, the menu may offer choices for subtitle languages, special features, or scene selection.To use the DVD Disc menu and select playback features, follow these steps.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 48 Fast Forward/Reverse Search Press DVD to put the DVD/VCR in DVD mode.The DVD light will appear on the front of the DVD/VCR. During playback, press g or h. Use g for a forward search. Press h for a reverse search. ●...
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Title/Chapter Playback, Specific Time Playback 49 Title/Chapter Playback With a DVD in the DVD/VCR, press DVD. The DVD light will appear on the front of the DVD/VCR. During DVD playback, press SEARCH until CH (for Chapter) or TT (for Title) appears on the TV.The number of available Titles or Chapters will appear at the right ( /4, for example).
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 50 Track Playback There are three ways to play an Audio CD, MP3, and Video CD (without PBC) at a specific Track: Use the Number buttons, the SEARCH button, or SKIP ∑/CH o or SKIP w/CH p. ●...
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Paused and Step-by-Step Playback, Resume On 51 Paused and Step-by-Step Playback Press DVD. The DVD light will appear on the front of the DVD/VCR. During DVD, Audio CD, or Video CD play, press PAUSE k. Play will pause and the sound will be mute. Press PAUSE k repeatedly to see a DVD or Video CD picture advance one frame (or step) at a time.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 52 Repeat, A-B Repeat Repeat Press DVD to put the DVD/VCR in DVD mode. During DVD,Audio CD, or Video CD (without PBC) play, press REPEAT until the repeat mode you want appears on the TV. On a DVD, select CHAPTER,TITLE, or OFF. On an Audio CD and Video CD (without PBC), select TRACK, ALL (all Tracks on the Disc), or OFF.With MP3 or JPEG files, select TRACK, GROUP (all Tracks in the current folder), or ALL.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Use Markers to remember your favorite places on an Audio CD, Video CD (without PBC), or DVD.To set the Markers, follow these steps. ● Before you begin, place the DVD/VCR in DVD mode. Press DVD so the DVD light appears on the front of the DVD/VCR. Play the Disc to within 30 seconds of the point at which you want to set the Marker.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 54 Subtitles, Camera Angles Subtitles You can select a language for DVD subtitles during playback.You can select only languages that are available on the DVD. Press DVD. The DVD light will appear on the front of the DVD/VCR.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Parental Controls prevents viewing of DVDs that exceed your rating limits.This feature will not limit viewing if the DVD is not rated or coded. Check your DVDs and settings before letting children access the DVD/VCR. Follow these steps to change your password. Press DVD to put the DVD/VCR in DVD mode.The DVD light will be on.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 56 Parental Levels Follow these steps to set the rating level for your DVDs. DVDs whose ratings exceed the level you set will not play. Press DVD to put the DVD/VCR in DVD mode. The DVD light will be on. Press STOP C to stop Disc playback if necessary.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Audio Language You can select a language for DVDs during playback if multiple languages are available. Press DVD to put the DVD/VCR in DVD mode if necessary.The DVD light will be on. During DVD playback, press AUDIO repeatedly to choose one of the available languages.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 58 DVD Slow Motion, Zoom Slow Motion Press PAUSE F during DVD or Video CD play. Press D or h. Slow motion play will begin. Press D or h repeatedly during slow motion play to play a DVD forward or backward at approximately 1/16, 1/8, or 1/2 the normal speed.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM You may determine the order in which Audio CD, MP3, or JPEG Tracks will play.To set a Program, follow these steps. Press DVD to put the unit in DVD mode. While playback is stopped, press MODE. The PROGRAM screen will appear.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 60 Random Playback You may play Audio CD, JPEG, or MP3 Tracks in Random order instead of the order in which they are recorded (1,2,3...). Press DVD to put the DVD/VCR in DVD mode. The DVD light will appear. While play is stopped, press MODE twice so the RANDOM screen appears.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM The DVD Player will play MP3 and JPEG files that you record and finalize on a CD-RW (Compact Disc-Rewritable) or CD-R (Compact Disc-Recordable). These Discs may contain pictures in a JPEG format or audio Tracks in an MP3 format. You may copy or download MP3 music files from certain legal Internet sites, then copy those files onto a CD- R or CD-RW.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 62 MP3/JPEG Displays You can review MP3 and JPEG information during play. ● Before you begin, place the DVD/VCR in DVD mode. Press DVD so the DVD light appears on the front of the DVD/VCR. Press DISPLAY during play. The current Track name will show on the TV screen.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM You can change the TV Aspect ratio, Still Mode clarity, Angle Icon availability, Automatic Power Off, and Progressive Scan features of the DVD Player in the Display menu. Press DVD to put the DVD/VCR in DVD mode. When play is stopped, press SYSTEM/MENU.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 64 Display (cont’d) ● If you selected ANGLE ICON, press OK repeatedly to turn it ON or OFF.The default setting is ON. Choose ON to see the Angle icon when multiple camera angles are available during DVD playback. Details are on page 54. Choose OFF to disable the Angle icon.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM You can use the LANGUAGE settings to select different languages for the Audio or Subtitles of DVDs, as well as languages for DVD Disc menus and the menus of the DVD Player SETUP menus. Press DVD to put the DVD/VCR in DVD mode. While playback is stopped, press SYSTEM/MENU.
Page 66
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 66 Language (cont’d) Press o or p to select a language, then press OK. The language list continues on multiple screens. Press o or p to move to the other screens. ● If you select OTHER for AUDIO, SUBTITLE, or DISC MENU, press four Number buttons to enter the code for the language you desire.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Change Audio settings based on other equipment you connected to the DVD/VCR or according to your Disc sound features.These settings only affect the Audio from the DVD Player of the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode. While play is stopped, press SYSTEM/MENU.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 68 On-Screen Displays DVD Displays Press DVD to put the DVD/VCR in DVD mode. Press DISPLAY repeatedly to see the following displays during DVD playback. CH 7/49 0:01:46 - 0:03:27 CH (Chapter): Current Chapter number / total Chapters TT (Title): Current Title number / Total Titles...
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Black Level Adjust Black Level to brighten the DVD and Video CD picture during playback. Press DVD to put the DVD/VCR in DVD mode. During DVD or Video CD play, press MODE so the Black Level icon shows in the top left corner of the TV screen.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 70 Initializing Initializing Use INITIALIZE to return all the DVD Player’s Setup menu items (except for PARENTAL) to their default settings. Press DVD to put the DVD/VCR in DVD mode. While play is stopped, press SYSTEM/MENU. The QUICK SETUP screen appears.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive audio from another source (IN) or send audio to another system (OUT).These jacks are red (right) and white (left). Automatic Channel Setup: process in which the VCR memorizes all available TV channels.Then, when you press SKIP ∑/CH o or SKIP w/CH p in VCR mode, you only scan through channels you receive.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM If you are having problems with your product, check this list of problems and possible solutions before requesting service.You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call.This information is displayed on the back of the product.
Page 74
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 74 Helpful Hints (cont’d) There is no sound. • Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV or Stereo. Details are on pages 10-13. • Check the audio settings of the DVD Player. Details are on page 67. •...
Page 75
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Power Failure • Clock setting, language selection, and channel setup may be lost if the power fails. See pages 25-29 to set up the channels, clock, and language again. The VCR will not record a TV program. •...
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM 76 Helpful Hints (cont’d) You cannot insert a video cassette. • Insert the tape, window side up, with the record tab facing you. • Make sure a tape isn’t already in the VCR by pressing STOP/EJECT C A (VCR) on the front of the DVD/VCR.
H9622MD(EN)47_78.qx4 04.4.8 5:04 PM Cleaning the DVD/VCR • Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft, slightly damp cloth. • Never use a solvent, thinner, benzene, or alcohol to clean the DVD/VCR. Do not spray insecticide liquid near the DVD/VCR.