Life Fitness Discover SE3HD Owner's Manual page 8

For treadmill, cross-trainer, upright and recumbent lifecycle exercise bikes, flexstrider variable-stride trainer, powermill climber, arc trainer
Table of Contents

Advertisement

WARNING: This product can expose you to chemicals including Di-2-ethylhexyl-phthalate, which is known to
the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
http://www.P65Warnings.ca.gov
Cross-Trainer
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
• Do not stand or sit on the rear plastic covers of the Cross-Trainer.
• Do not stand on center tube of the Cross-Trainer.
• The individual human power required to perform an exercise may be different than the mechanical power
displayed on the Cross-Trainer and FlexStrider.
• Use caution when mounting or dismounting the Cross-Trainer and FlexStrider. Before mounting, use the moving
arms to bring the pedal nearest to you to the lowest position. Use the stationary handlebars whenever additional
stability is required. While exercising, hold onto the moving arms.
• Never face backward while using the Cross-Trainer or FlexStrider.
POWERMILL
CLIMBER
WARNING: Keep a distance of at least 3 ft. (1 m) behind and 1 ft. (0.3 m ) on each side of the unit clear of any
obstructions, including walls, furniture, and other equipment.
• Handrails may be held to enhance stability as needed, but are not for continuous use.
• The product should never be left unattended when plugged in. Disconnect from the electrical outlet when not in
use, and before putting on or taking off parts. To disconnect, turn power OFF at the ON/OFF switch, then remove
plug from electrical outlet.
• Never walk or jog backwards on the PowerMill Climber.
• Unlike bikes, cross-trainers, or the traditional paddle stairclimbers, this is a motorized product. This motorized
product causes stair steps to descend at variable rates and therefore operates on different planes simultaneously.
While operating the product during a typical workout, the user is forced to fully concentrate on coordinating his or
her efforts on the moving stairs. Therefore, the user cannot see if anyone or any thing approaches from the rear. For
these reasons this unit is designed for use only in a controlled setting. The PowerMill Climber is not designed for
use in the home and should not be used in an environment where children or animals might have access.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Page 6 of 86
http://

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents