Life Fitness Discover SE3HD Owner's Manual page 54

Setting Default
Calorie Per Hour On (International: Off) If this option is enabled, the MESSAGE CENTER displays the number
(CPH) Display
Steps Climbed Off
Display
Max Acceleration 3
Rate
Max Deceleration 3
Rate
Minimum Speed 20 SPM
(SPM)
Maximum Speed 160 SPM
(SPM)
Description
of calories burned per hour during the workout.
If this setting is enabled, the total number of steps climbed is
periodically shown during a workout.
This sets the rate at which the PowerMill Climber accelerates to the
selected speed, ranging from one (slowest) to five (fastest).
This sets the rate at which the PowerMill Climber decelerates to the
selected speed, ranging from one (slowest) to five (fastest).
Set the slowest speed the PowerMill can operate.
Set the fastest speed the PowerMill can operate.
Page 52 of 86